Clearance: *2nd* Antares 1.25" Extension Tube with 2.2" Extension
Availability: Item has been discontinued by the manufacturer
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
Important Note: Brand new item as received from Antares. The 1.25" eyepiece holder seems to be just slightly undersized. It worked with all six 1.25" barrels we tested it with. Most went in easily and smoothly as they should. However, a couple needed a bit of coaxing and care to insert, but again, they all worked. Closeout, so all sales are final.
Antares' 1.25" Extension Tube # ET1 adds 56.5mm (2.22") of back-focus travel to your telescope focuser. It fits standard 1.25" eyepiece tubes in telescopes and accessories like diagonals. With this, eyepieces and accessories that you may not have been able to use because your focuser tube was too short are usable again The adapter is precision machined from aluminum and black anodized, and threaded to accept standard 1.25" astronomy filters.
Note that Antares uses a fat thumbscrew on this item at the top, and this extends a bit above the top of adapter. So if you have a very wide eyepiece or accessory, the screw may get in the way and prevent the inserted item from going in all the way into the adapter. Typical Antares production quality - works well but a bit rough in finish.
Specifications:
- Total Length = 3.35" (85mm)
- Outside Length of Upper 1.25" Barrel = 2.22" (56.5mm)
- Length of Lower 1.25" Barrel = 1.12" (28.5mm)
- Thread Specification (Telescope End) = M28.5x0.6 Female
- Made in Canada
| Product Banner Type | discontinued |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
Important Note: Brand new item as received from Antares. The 1.25" eyepiece holder seems to be just slightly undersized. It worked with all six 1.25" barrels we tested it with. Most went in easily and smoothly as they should. However, a couple needed a bit of coaxing and care to insert, but again, they all worked. Closeout, so all sales are final.
Antares' 1.25" Extension Tube # ET1 adds 56.5mm (2.22") of back-focus travel to your telescope focuser. It fits standard 1.25" eyepiece tubes in telescopes and accessories like diagonals. With this, eyepieces and accessories that you may not have been able to use because your focuser tube was too short are usable again The adapter is precision machined from aluminum and black anodized, and threaded to accept standard 1.25" astronomy filters.
Note that Antares uses a fat thumbscrew on this item at the top, and this extends a bit above the top of adapter. So if you have a very wide eyepiece or accessory, the screw may get in the way and prevent the inserted item from going in all the way into the adapter. Typical Antares production quality - works well but a bit rough in finish.
Specifications:
- Total Length = 3.35" (85mm)
- Outside Length of Upper 1.25" Barrel = 2.22" (56.5mm)
- Length of Lower 1.25" Barrel = 1.12" (28.5mm)
- Thread Specification (Telescope End) = M28.5x0.6 Female
- Made in Canada
| Product Banner Type | discontinued |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |