Baader Hyperion DT Ring HDT54/62 (M54 to M62)
Ships by Next Business Day
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
Baader Hyperion DT Ring HDT54/62 (M54 to M62) # 2958062. Other rings in this series referenced below are sold separately.
Baader Hyperion Digital T-Rings enable you to couple practically any digital camera, camcorder, or CCD Camera directly to the 54mm thread of the Baader Hyperion fixed focal length eyepieces and Mark II Clickstop Zoom (these rings are not for use with the newer Hyperion Mark III or Mark IV zoom eyepiece).
Hyperions make the ideal projection eyepiece for afocal projection imaging, delivering a very sharp projected image without any vignetting. The direct threaded coupling permitted by the Digital T-rings results in the most accurate and rigid attachment possible even with large and heavy cameras and video cameras. This system also allows the cameras lens to be located immediately above the large eyelens for eliminating the vignetting common in other systems (afocal projection).
- For attaching cameras with 28mm or 37mm filter threads, you will need the appropriate HDT ring as well as a 54mm extension ring (sold separately).
- For attaching cameras with filter threads from 46mm to 62mm, a single HDT ring will suffice.
- For attaching cameras with filter threads from 67mm to 77mm, you will need two step-up rings; the HDT54/62 ring + the appropriate HDT62/xx ring.
- For attaching cameras with an 82mm filter thread, you will need three step-up rings; the HDT54/62 ring + the HDT62/72 ring + the HDT72/82 ring.
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
Baader Hyperion DT Ring HDT54/62 (M54 to M62) # 2958062. Other rings in this series referenced below are sold separately.
Baader Hyperion Digital T-Rings enable you to couple practically any digital camera, camcorder, or CCD Camera directly to the 54mm thread of the Baader Hyperion fixed focal length eyepieces and Mark II Clickstop Zoom (these rings are not for use with the newer Hyperion Mark III or Mark IV zoom eyepiece).
Hyperions make the ideal projection eyepiece for afocal projection imaging, delivering a very sharp projected image without any vignetting. The direct threaded coupling permitted by the Digital T-rings results in the most accurate and rigid attachment possible even with large and heavy cameras and video cameras. This system also allows the cameras lens to be located immediately above the large eyelens for eliminating the vignetting common in other systems (afocal projection).
- For attaching cameras with 28mm or 37mm filter threads, you will need the appropriate HDT ring as well as a 54mm extension ring (sold separately).
- For attaching cameras with filter threads from 46mm to 62mm, a single HDT ring will suffice.
- For attaching cameras with filter threads from 67mm to 77mm, you will need two step-up rings; the HDT54/62 ring + the appropriate HDT62/xx ring.
- For attaching cameras with an 82mm filter thread, you will need three step-up rings; the HDT54/62 ring + the HDT62/72 ring + the HDT72/82 ring.
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
Baader Hyperion DT Ring HDT54/62 (M54 to M62) # 2958062