Bob's Knobs for Celestron C14 f/11 Secondary with Factory Phillips Collimation Screws w...
Ships by Next Business Day
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: C14stdphi
Fits: Celestron 14" (36 cm) f/11 SCT versions with standard-thread Phillips collimation screws with standard threads, with or without Fastar (see second photo).
Knobs: Black plastic, 16 mm (5/8") diameter (standard thread)
Threads: Black anodized aluminum alloy (standard thread)
Notes:
- See the special note above for information on standard and metric threads.
- The factory dust cover will fit normally with Bob's Knobs installed.
- If your telescope has a rotary secondary cover, it must remain open when knobs are installed. The cover is cosmetic only and will not affect operation of the telescope.
- Our knobs cannot protrude above the Trifid-style rotary cover or they will interfere with the factory dust cover. For better knob access, you can peel off the vinyl escutcheon and remove this cover (see third photo) or simply access the knobs partly from the side.
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: C14stdphi
Fits: Celestron 14" (36 cm) f/11 SCT versions with standard-thread Phillips collimation screws with standard threads, with or without Fastar (see second photo).
Knobs: Black plastic, 16 mm (5/8") diameter (standard thread)
Threads: Black anodized aluminum alloy (standard thread)
Notes:
- See the special note above for information on standard and metric threads.
- The factory dust cover will fit normally with Bob's Knobs installed.
- If your telescope has a rotary secondary cover, it must remain open when knobs are installed. The cover is cosmetic only and will not affect operation of the telescope.
- Our knobs cannot protrude above the Trifid-style rotary cover or they will interfere with the factory dust cover. For better knob access, you can peel off the vinyl escutcheon and remove this cover (see third photo) or simply access the knobs partly from the side.
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
Bob's Knobs for Celestron C14 f/11 Secondary with Factory Phillips Collimation Screws with Standard Threads # C14stdphi