Bob's Knobs for Celestron C9.25 f/10 Secondary with Trifid Fastar Housing
Ships by Next Business Day
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: C9.25fst
Fits: Celestron 9.25" (23.5 cm) f/10 SCT versions with "Trifid" Fastar secondary housing ONLY
Knobs: Black plastic, 15 mm (5/8") diameter
Threads: Stainless steel or black oxide steel
Notes:
- These knobs fit only the Celestron 9.25” f/10 SCT with a Fastar secondary (second photo) which has black Phillips factory collimation screws that are recessed into the secondary housing. These knobs will fit C9.25 Fastar telescopes with or without EdgeHD optics.
- Collimation screws on these telescopes are small with very fine threads. Knobs must be tightened gently (just enough to hold the secondary in place) to prevent damage to either the knob or secondary assembly.
- Knobs include a set of long spacers so they sit slightly above the rotary cover opening.
- The factory dust cover will fit normally with Bob’s Knobs installed.
- The rotary secondary cover must remain open when the knobs are installed. The cover is cosmetic only and will not affect operation of the telescope.
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
Collimate your Catadioptric or Newtonian reflector style telescopes without tools!
It's easy...just grab a Bob's Knob collimation thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. These thumbscrews are also much easier to use with gloves on. And perhaps most importantly, you'll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Part: C9.25fst
Fits: Celestron 9.25" (23.5 cm) f/10 SCT versions with "Trifid" Fastar secondary housing ONLY
Knobs: Black plastic, 15 mm (5/8") diameter
Threads: Stainless steel or black oxide steel
Notes:
- These knobs fit only the Celestron 9.25” f/10 SCT with a Fastar secondary (second photo) which has black Phillips factory collimation screws that are recessed into the secondary housing. These knobs will fit C9.25 Fastar telescopes with or without EdgeHD optics.
- Collimation screws on these telescopes are small with very fine threads. Knobs must be tightened gently (just enough to hold the secondary in place) to prevent damage to either the knob or secondary assembly.
- Knobs include a set of long spacers so they sit slightly above the rotary cover opening.
- The factory dust cover will fit normally with Bob’s Knobs installed.
- The rotary secondary cover must remain open when the knobs are installed. The cover is cosmetic only and will not affect operation of the telescope.
| Free Shipping Graphic | Free US Shipping |
|---|---|
| Hide Found a better Shipped Price on Frontend? | No |
Bob's Knobs for Celestron C9.25 f/10 Secondary with Trifid Fastar Housing # C9.25fst