Daystar Tilt Adjuster / Interference Eliminator - Quark to T Thread with No Reduction
Ships by Next Business Day
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
This accessory, designed for use with Daystar's Quarks, allows mounting an M42 T thread camera directly to the Quark and also includes a tilt function to remove Newton's Rings (also known as interference fringes). If you plan to image with your Quark, this is the most important accessory to purchase.
This unit tilts up to 5 degrees in order to handle the nastiest fringes. Do not waste your time on competitor's tilt adapters that were designed for nighttime use - those do not have nearly enough tilt range.
The camera clocking angle can also be adjusted at 30 degree intervals by removing the thumbscrews and choosing a different hole pair. This allows you to orient the camera for the best cable management.
Designed to work natively with 17.5mm flange focal distance cameras, it also includes a 5mm spacer ring for use with 12.5mm flange distance cameras.
Specifications:
- Tilt range: +/- 5 degrees
- Quark side thread: Male 1 3/8-24 UNS
- Camera side thread: Male M42x0.75
| Product Banner Type | new |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
This accessory, designed for use with Daystar's Quarks, allows mounting an M42 T thread camera directly to the Quark and also includes a tilt function to remove Newton's Rings (also known as interference fringes). If you plan to image with your Quark, this is the most important accessory to purchase.
This unit tilts up to 5 degrees in order to handle the nastiest fringes. Do not waste your time on competitor's tilt adapters that were designed for nighttime use - those do not have nearly enough tilt range.
The camera clocking angle can also be adjusted at 30 degree intervals by removing the thumbscrews and choosing a different hole pair. This allows you to orient the camera for the best cable management.
Designed to work natively with 17.5mm flange focal distance cameras, it also includes a 5mm spacer ring for use with 12.5mm flange distance cameras.
Specifications:
- Tilt range: +/- 5 degrees
- Quark side thread: Male 1 3/8-24 UNS
- Camera side thread: Male M42x0.75
| Product Banner Type | new |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
Daystar Tilt Adjuster / Interference Eliminator - Quark to T Thread with No Reduction # IEQT