Sky-Watcher EQ6-R Pro Computerized GoTo Telescope Mount (with Hand Controller)
Ships by Next Business Day
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
- Massive 44-pound payload capacity support guiders, filters, cameras, and more
- Equatorial GoTo mount with built-in USB PC control
- Belt drives provide minimal backlash and significantly reduced periodic error while remaining whisper quiet
- Stepper motors have no internal gear box, further reducing backlash
- SNAP port eliminates the need for remote shutter release cable
- Autoguide port compatible with most of today’s best autoguiders
- Sturdy carry handle to ensure safe and easy set-up
- Mount head weight: 36lbs
- D/V saddle plate to handle a wide variety of OTAs
- Built-in illuminated polar scope is factory aligned to the mount's center axis and best accuracy right out of the box
- 42,000+ object data base
- Retractable counterweight bar for easy stowage
- Steel tripod for rock-solid performance
- Tripod weight: 15.9lbs
- DC power cord included
- Two 11-pound counterweights
- Tripod mounting: M12x1.75
- Counterweight shaft is 25mm diameter
An Astrophotography Powerhouse
The Sky-Watcher EQ6-R # S30300 boasts a plethora of features to support astrophotographers in their craft. The built-in ST-4 autoguider port turns this mount into an astrophotography powerhouse, allowing you to use most of today’s best autoguiders. Using the supplied USB-B cable, you can control the telescope from your computer and take advantage of today’s most advanced astronomy software. With a weight capacity of 44 pounds, the EQ6-R can handily support an optical tube, imaging accessories, and camera.
Silent Yet Precise Slewing
The EQ6-R Pro uses stepper motors with a 1.8° step angle and 64 micro steps driven. Stepper motors are quieter than servo motors, providing accuracy up to 1 arc minute without waking your neighbors to the tune of buzzing motors. 42,000+ Object Database
Using our proprietary SynScan hand controller, the EQ6-R Pro provides a user-friendly interface with automatic slewing to over 42,000+ objects in the night sky. The hand controller can also connect to a computer using the supplied USB-B cable, enabling computer control with most astronomy programs. For the astrophotographers looking to reduce periodic error, the SynScan hand controller has built in PEC training that can be configured while in the field!
Flexible Polar Alignment
Sky-Watcher includes an illuminated polar scope to aid the polar alignment process. The polar scope features a circular grid reticle for the Northern Hemisphere, consistent with today’s popular polar alignment apps. For astronomers in the Southern Hemisphere, the constellation Octans is built into the reticle as well. Even without a clear view of Polaris, the EQ6-R Pro can be polar aligned using our SynScan hand controller. Simply choose one of the visible stars listed and use the latitude adjustment screws to center it in the eyepiece.
Bundle of Accessories
As customary with all Sky-Watcher products, there are an assortment of accessories included with the EQ6-R Pro mount. A retractable counterweight bar is supplied, allowing for easier transportation. Also, two 11-pound counterweights are included to help balance any payload. The EQ6-R Pro features a saddle compatible with both D- and V-style mounting plates, giving users the flexibility to use multiple optical tubes, even if the mounting plate is different.
Specifications:
General Mount Info:
- Mount Type: EQ
- GoTo: Yes
- Payload Capacity: 44 lbs
- Mount Head Weight: 38 lbs
- Tripod Weight: 16.5 lbs
- Fully Assembled Weight (w/ weights): 76.5 lbs
- Tripod Leg Diameter: 2"
- Mounting Saddle Type: D/V
- Power Type: 12V (4 amp minimum)
- Clutch: Locking Lever
- Polar Scope: Built In
- Latitude Range: May-65 deg
Computer/Drive System Info:
- Object Database: 42900+
- Controller: Hand Controller
- WiFi: Optional WiFi dongle
- Polar Align Assist: Yes
- PC Direct Connect Port: Yes
- Auto Guide: Yes
- Permanent Periodic Correction: Yes
- Dual Encoders: No
- DSLR Enterface: Yes
- Included Weights: 11 lbs (two)
- Motor Type: Stepper
- Drive System: Belt
| Product Banner Type | sale |
|---|---|
| Free Shipping Graphic | Free Contiguous US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
Box #1
- EQ6-R mount head
- SynScan hand controller
- Hand controller cable
- SNAP cable
- 12v DC power cable
- Counterweight bar extension
- Toe saver
- Azimuth and Latitude adjustment bolts
- Hand controller holster
Box #2
- EQ6-R tripod
- Mount head mounting rod
- Accessory tray
- 11-pound counterweight (2x)
- Massive 44-pound payload capacity support guiders, filters, cameras, and more
- Equatorial GoTo mount with built-in USB PC control
- Belt drives provide minimal backlash and significantly reduced periodic error while remaining whisper quiet
- Stepper motors have no internal gear box, further reducing backlash
- SNAP port eliminates the need for remote shutter release cable
- Autoguide port compatible with most of today’s best autoguiders
- Sturdy carry handle to ensure safe and easy set-up
- Mount head weight: 36lbs
- D/V saddle plate to handle a wide variety of OTAs
- Built-in illuminated polar scope is factory aligned to the mount's center axis and best accuracy right out of the box
- 42,000+ object data base
- Retractable counterweight bar for easy stowage
- Steel tripod for rock-solid performance
- Tripod weight: 15.9lbs
- DC power cord included
- Two 11-pound counterweights
- Tripod mounting: M12x1.75
- Counterweight shaft is 25mm diameter
An Astrophotography Powerhouse
The Sky-Watcher EQ6-R # S30300 boasts a plethora of features to support astrophotographers in their craft. The built-in ST-4 autoguider port turns this mount into an astrophotography powerhouse, allowing you to use most of today’s best autoguiders. Using the supplied USB-B cable, you can control the telescope from your computer and take advantage of today’s most advanced astronomy software. With a weight capacity of 44 pounds, the EQ6-R can handily support an optical tube, imaging accessories, and camera.
Silent Yet Precise Slewing
The EQ6-R Pro uses stepper motors with a 1.8° step angle and 64 micro steps driven. Stepper motors are quieter than servo motors, providing accuracy up to 1 arc minute without waking your neighbors to the tune of buzzing motors. 42,000+ Object Database
Using our proprietary SynScan hand controller, the EQ6-R Pro provides a user-friendly interface with automatic slewing to over 42,000+ objects in the night sky. The hand controller can also connect to a computer using the supplied USB-B cable, enabling computer control with most astronomy programs. For the astrophotographers looking to reduce periodic error, the SynScan hand controller has built in PEC training that can be configured while in the field!
Flexible Polar Alignment
Sky-Watcher includes an illuminated polar scope to aid the polar alignment process. The polar scope features a circular grid reticle for the Northern Hemisphere, consistent with today’s popular polar alignment apps. For astronomers in the Southern Hemisphere, the constellation Octans is built into the reticle as well. Even without a clear view of Polaris, the EQ6-R Pro can be polar aligned using our SynScan hand controller. Simply choose one of the visible stars listed and use the latitude adjustment screws to center it in the eyepiece.
Bundle of Accessories
As customary with all Sky-Watcher products, there are an assortment of accessories included with the EQ6-R Pro mount. A retractable counterweight bar is supplied, allowing for easier transportation. Also, two 11-pound counterweights are included to help balance any payload. The EQ6-R Pro features a saddle compatible with both D- and V-style mounting plates, giving users the flexibility to use multiple optical tubes, even if the mounting plate is different.
Specifications:
General Mount Info:
- Mount Type: EQ
- GoTo: Yes
- Payload Capacity: 44 lbs
- Mount Head Weight: 38 lbs
- Tripod Weight: 16.5 lbs
- Fully Assembled Weight (w/ weights): 76.5 lbs
- Tripod Leg Diameter: 2"
- Mounting Saddle Type: D/V
- Power Type: 12V (4 amp minimum)
- Clutch: Locking Lever
- Polar Scope: Built In
- Latitude Range: May-65 deg
Computer/Drive System Info:
- Object Database: 42900+
- Controller: Hand Controller
- WiFi: Optional WiFi dongle
- Polar Align Assist: Yes
- PC Direct Connect Port: Yes
- Auto Guide: Yes
- Permanent Periodic Correction: Yes
- Dual Encoders: No
- DSLR Enterface: Yes
- Included Weights: 11 lbs (two)
- Motor Type: Stepper
- Drive System: Belt
| Product Banner Type | sale |
|---|---|
| Free Shipping Graphic | Free Contiguous US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
Box #1
- EQ6-R mount head
- SynScan hand controller
- Hand controller cable
- SNAP cable
- 12v DC power cable
- Counterweight bar extension
- Toe saver
- Azimuth and Latitude adjustment bolts
- Hand controller holster
Box #2
- EQ6-R tripod
- Mount head mounting rod
- Accessory tray
- 11-pound counterweight (2x)
Sky-Watcher EQ6-R Pro Computerized GoTo Telescope Mount (with Hand Controller) # S30300