Telrad Telescope Reflex Finder with Mounting Base and White Illumination (For Stage / Concer...
Ships by Next Business Day
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
IMPORTANT - This version of the Telrad Finder is meant for daytime or terrestrial use ONLY. It cannot be used for astronomical applications.
The Telrad Reflex finder has been extremely popular with astronomers for decades. However, the Telrad Sight has also found wide adoption in the stage lighting industry. It works very well as a spot light sighting device for professional concert and stage spot light operators or for other terrestrial applications during daylight hours.
This special version replaces the red LED light found on the astronomy version with a much brighter white LED light that makes it very easy to see the circular reticle pattern, even in broad daylight. The reticle pattern consists of three concentric rings. The large ring is 4 degrees across, the center ring is 2 degrees in diameter and the small ring is 0.5 degrees across. This version runs on four AA batteries (not included).
The Telrad weighs a mere 11 ounces due to its lightweight yet robust ABS plastic construction, and mounts on any curved surface without drilling holes using the double-sided tape on the bottom of the Telrad base. For concert or stage applications, spotlight operators often mount the Telrad using Gaffer tape instead.
The Telrad is 8.15" long and 2.24" wide (at the base) so please make sure that you have sufficient clear area on your spotlight to mount this. The Telrad unlocks from its base for separate storage. Extra bases are also sold separately so you can leave bases mounted on different spot lights and move the Telrad unit between them as required.
Specifications:
- Magnification: 1x (Zero power)
- Weight (with 4 AA batteries, not included): 10.1 oz.
- Total length: 8.15" / 207mm
- Total height (with base): 4.92" / 125mm
- Maximum width (excluding base screws but with base on): 2.24" / 57mm
- Maximum width (without base): 1.89" / 48mm
- Viewing window dimensions (full lengh, not vertical height): 2.52" x 1.42" (64mm x 36mm)
- Base thumbscrew specification: 6-32, 0.5" long (2x)
| Product Banner Type | new |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
IMPORTANT - This version of the Telrad Finder is meant for daytime or terrestrial use ONLY. It cannot be used for astronomical applications.
The Telrad Reflex finder has been extremely popular with astronomers for decades. However, the Telrad Sight has also found wide adoption in the stage lighting industry. It works very well as a spot light sighting device for professional concert and stage spot light operators or for other terrestrial applications during daylight hours.
This special version replaces the red LED light found on the astronomy version with a much brighter white LED light that makes it very easy to see the circular reticle pattern, even in broad daylight. The reticle pattern consists of three concentric rings. The large ring is 4 degrees across, the center ring is 2 degrees in diameter and the small ring is 0.5 degrees across. This version runs on four AA batteries (not included).
The Telrad weighs a mere 11 ounces due to its lightweight yet robust ABS plastic construction, and mounts on any curved surface without drilling holes using the double-sided tape on the bottom of the Telrad base. For concert or stage applications, spotlight operators often mount the Telrad using Gaffer tape instead.
The Telrad is 8.15" long and 2.24" wide (at the base) so please make sure that you have sufficient clear area on your spotlight to mount this. The Telrad unlocks from its base for separate storage. Extra bases are also sold separately so you can leave bases mounted on different spot lights and move the Telrad unit between them as required.
Specifications:
- Magnification: 1x (Zero power)
- Weight (with 4 AA batteries, not included): 10.1 oz.
- Total length: 8.15" / 207mm
- Total height (with base): 4.92" / 125mm
- Maximum width (excluding base screws but with base on): 2.24" / 57mm
- Maximum width (without base): 1.89" / 48mm
- Viewing window dimensions (full lengh, not vertical height): 2.52" x 1.42" (64mm x 36mm)
- Base thumbscrew specification: 6-32, 0.5" long (2x)
| Product Banner Type | new |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
Telrad Telescope Reflex Finder with Mounting Base and White Illumination (For Stage / Concert Spotlights; Not For Astronomy)