WandererAstro Wanderer Cover V4 Pro-EC 320mm
Ships by Next Business Day
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
WandererAstro WandererCover Review
WandererCover V4EC - professional lightweight motorized flat panel
Added 12V DC input port, indicator light, and soft pads to protect the lens barrel.
(Note: 12V power supply is required)
The built-in encoder provides real-time and accurate feedback on the position of the cover, allowing users to know the angle of the cover without relying on a monitor camera. Repeatable positioning accuracy is higher than ±0.25 degrees.
Brand new motor adopted, the payload is increased by more than 50%, ensuring its durability and preventing gearbox damage. After testing, the life of WandererCover V4-EC exceeds 3,000 opening and closing cycles.
In humid areas, dew will occur on the flat panel at night. If the dew does not evaporate in time, it will easily make the inside of the telescope moist after closing the cover, which may cause the lens to become damp and moldy in the long term.
The V4-EC has built-in heating elements to keep the cover dry all night or quickly evaporate dew in the morning. The dew heater can be controlled in NINA advanced sequence using the plugin "Device Actions and Commands".
Thanks to the encoder, V4-EC provides automatic detection of the open and closed position*. If your device is not around and manual setting is not possible, WandererCover can automatically detect obstacles and set the open and closed position.
*It is always recommended to set the open and closed angles manually! Use automatic detection as the last option only when the flat panel angle cannot be observed. It is normal for the motorbox to heat up during automatic detection. The angle detected is affected by many factors and success is not guaranteed. Do not try multiple times if unsuccessful.
The new ASCOM driver makes use easier. The All-in-one driver will automatically identify the device model and connect. It also supports automatic or manual port selection and connection of up to 6 devices simultaneously. The control interface has also been optimized and is now more beautiful.
The new dimming controller increases the PWM dimming frequency by 100% to further avoid bandings. 255 levels of dimming meet the needs of flat-field shooting in most situations.
Specifications
- Luminous diameter: 320mm
- Weight: 1120g
- Outer diameter: 350mm
- USB: 2.0 Type-B
- Power: 12V 2A DC5.5*2.1mm
Please note: WandererAstro's flat panels, camera rotators, dust covers and power boxes are controlled via their WandererEmpire app or other software that supports ASCOM such as N.I.N.A. With the latest software update (be sure to download the latest version from our ‘Links and Downloads’ section on this page), in addition to ASCOM and INDI compatibility, WandererAstro also supports control via ZWO ASIAIR Plus, ToupTek StellaVita, and any device capable of operating a DC switch.
| Product Banner Type | new |
|---|---|
| Free Shipping Graphic | Free Contiguous US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
- 1x WandererCover V4-EC 320mm
- 1x USB2.0 cable (1m)
- 1x DC5521 male to male power cable (1m)
- 4x Nylon cable ties
WandererAstro WandererCover Review
WandererCover V4EC - professional lightweight motorized flat panel
Added 12V DC input port, indicator light, and soft pads to protect the lens barrel.
(Note: 12V power supply is required)
The built-in encoder provides real-time and accurate feedback on the position of the cover, allowing users to know the angle of the cover without relying on a monitor camera. Repeatable positioning accuracy is higher than ±0.25 degrees.
Brand new motor adopted, the payload is increased by more than 50%, ensuring its durability and preventing gearbox damage. After testing, the life of WandererCover V4-EC exceeds 3,000 opening and closing cycles.
In humid areas, dew will occur on the flat panel at night. If the dew does not evaporate in time, it will easily make the inside of the telescope moist after closing the cover, which may cause the lens to become damp and moldy in the long term.
The V4-EC has built-in heating elements to keep the cover dry all night or quickly evaporate dew in the morning. The dew heater can be controlled in NINA advanced sequence using the plugin "Device Actions and Commands".
Thanks to the encoder, V4-EC provides automatic detection of the open and closed position*. If your device is not around and manual setting is not possible, WandererCover can automatically detect obstacles and set the open and closed position.
*It is always recommended to set the open and closed angles manually! Use automatic detection as the last option only when the flat panel angle cannot be observed. It is normal for the motorbox to heat up during automatic detection. The angle detected is affected by many factors and success is not guaranteed. Do not try multiple times if unsuccessful.
The new ASCOM driver makes use easier. The All-in-one driver will automatically identify the device model and connect. It also supports automatic or manual port selection and connection of up to 6 devices simultaneously. The control interface has also been optimized and is now more beautiful.
The new dimming controller increases the PWM dimming frequency by 100% to further avoid bandings. 255 levels of dimming meet the needs of flat-field shooting in most situations.
Specifications
- Luminous diameter: 320mm
- Weight: 1120g
- Outer diameter: 350mm
- USB: 2.0 Type-B
- Power: 12V 2A DC5.5*2.1mm
Please note: WandererAstro's flat panels, camera rotators, dust covers and power boxes are controlled via their WandererEmpire app or other software that supports ASCOM such as N.I.N.A. With the latest software update (be sure to download the latest version from our ‘Links and Downloads’ section on this page), in addition to ASCOM and INDI compatibility, WandererAstro also supports control via ZWO ASIAIR Plus, ToupTek StellaVita, and any device capable of operating a DC switch.
| Product Banner Type | new |
|---|---|
| Free Shipping Graphic | Free Contiguous US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
- 1x WandererCover V4-EC 320mm
- 1x USB2.0 cable (1m)
- 1x DC5521 male to male power cable (1m)
- 4x Nylon cable ties
WandererAstro Wanderer Cover V4 Pro-EC 320mm # WMFP4P-320