ZWO M54 Tilter Adapter for Select ZWO Cameras
Ships by Next Business Day
Contiguous US Customers:
All items we sell ship for free within the Contiguous US. Shipping will be via the cheapest shipping method which will vary depending on the items in your order. During checkout, you may also be shown other optional faster shipping choices.
US Customers in Hawaii and Alaska:
Free shipping applies to almost all products. A few large telescopes and mounts are excluded from this free shipping offer. For these items, please contact us to obtain a shipping quote before you check out using the online shopping cart.
International Customers:
Free shipping does not apply to international orders. During check-out, you will be presented with several shipping choices and costs. However, the export of some items may be restricted outside the US due to size or manufacturer restrictions.
Notice: Before you purchase this M54 tilter, please consult ZWO customer service to confirm whether it fits your setup. They have not provided us with clear, detailed information yet for this item so we are unable to assist with compatibility or application inquiries until they do. Please buy this item only if you are positive that this will work for your intended application. We will update this page as we get more clarity from ZWO.
The M54 tilter makes sensor tilt adjustment much easier than before by allowing you to do the adjustment on the rear end of the camera. You now can make some adjustments during imaging, instead of taking the camera off from the telescope.
Compatible cameras:
- ASI2600MC Duo
- ASI2600MM/MC Pro
- ASI6200MM/MC Pro
- ASI2400MC Pro
It also fits 7x50mm EFW.
Installation guide:
1. Use a hex wrench to take off the three M3 cylindrical screws on the adapter.
2. Disassemble the sensor tilt plate from the DSO camera.
3. Place the base of the M54-Tilter onto the cooled camera. Fix them with six 5x6 Phillips flat-head screws.
4. Then place the top cover of the M54 tilter onto the camera. Turn over them and fix the base and top cover with three M3 screws. Please do align the screws to the M3 screw holes (as shown in the mechanical drawing). The angle between each two M3 screws should be 120°.
| Product Banner Type | new |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
- M54 tilter x 1
- 6xM2.5 countersunk screws x 6
Notice: Before you purchase this M54 tilter, please consult ZWO customer service to confirm whether it fits your setup. They have not provided us with clear, detailed information yet for this item so we are unable to assist with compatibility or application inquiries until they do. Please buy this item only if you are positive that this will work for your intended application. We will update this page as we get more clarity from ZWO.
The M54 tilter makes sensor tilt adjustment much easier than before by allowing you to do the adjustment on the rear end of the camera. You now can make some adjustments during imaging, instead of taking the camera off from the telescope.
Compatible cameras:
- ASI2600MC Duo
- ASI2600MM/MC Pro
- ASI6200MM/MC Pro
- ASI2400MC Pro
It also fits 7x50mm EFW.
Installation guide:
1. Use a hex wrench to take off the three M3 cylindrical screws on the adapter.
2. Disassemble the sensor tilt plate from the DSO camera.
3. Place the base of the M54-Tilter onto the cooled camera. Fix them with six 5x6 Phillips flat-head screws.
4. Then place the top cover of the M54 tilter onto the camera. Turn over them and fix the base and top cover with three M3 screws. Please do align the screws to the M3 screw holes (as shown in the mechanical drawing). The angle between each two M3 screws should be 120°.
| Product Banner Type | new |
|---|---|
| Free Shipping Graphic | Free US Shipping |
| Hide Found a better Shipped Price on Frontend? | No |
- M54 tilter x 1
- 6xM2.5 countersunk screws x 6
ZWO M54 Tilter Adapter for Select ZWO Cameras # M54-TILTER